AES Encryption & Decryption IP Core − Programmable Block Cipher Modes
The AES-P IP core from Alma Technologies implements the FIPS-197 Advanced Encryption Standard. It can be programmed to encrypt or decrypt 128-bit blocks of data, using 128-, 192-, or 256-bit cipher-key. The Block Cipher mode of operation is run-time programmable to ECB, CBC, CFB, OFB, or CTR. The AES-P core is available in two variations, the standard AES32-P and the fast AES128-P.
AES32-P has a 32-bit internal datapath, while the AES128-P uses 128-bit datapath. The AES32-P is more compact in size, but offers a lower throughput than the AES128-P. The AES32-P needs 44/52/60 clock cycles to encrypt or decrypt an input block using 128/192/256-bit cipher-key, respectively, while only 11/13/15 clock cycles are required for the same by the AES128-P core.
During each step of the encryption or decryption processing the core requires a previously calculated Round Key Value, derived from the cipher-key using a key expansion algorithm. The Round Key Values must be stored to the internal Round Key Table, from which the core retrieves the appropriate one for each processing step. Alternatively, instead of directly programming the Round Key Values to the Round Key Table, an optional Key Expander module can be provided. This module automatically calculates the Round Key Values and fills the internal Round Key Table according to the cipher-key given to the core.
The AES-P core is equipped with easy-to-use fully stallable interfaces for both input and output. These are designed to permit the user application to pause the produced output data stream when it is not able to receive data, or to pause the input stream towards the core according to data arrival rate.
Clear text VHDL or Verilog RTL source for ASIC designs, or pre-synthesized and verified Netlist for FPGA and SoC devices
Release Notes, Design Specification and Integration Manual documents
Bit Accurate Model (BAM) and test vector generation binaries, including sample scripts
Self checking testbench environment, including sample BAM generated test cases
Simulation and sample Synthesis (for ASICs) or Place & Route (for FPGAs) scripts